Instructions for use DISHWASHER GB English Contents Precautions and safety advice, 2-3 General safety Disposal of old electrical appliances Saving energy and respecting the environment Recycling & Disposal Information Installation, 4-6 Positioning and levelling Connecting the electricity and water supplies Technical data Advice regarding the first wash cycle SETTINGS button Selecting the language Child safety lock Description of the appliance, 7 FDUD 44110 ULTIMA Overall view Control panel Loading
Precautions and safety advice GB The appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety reasons and should therefore be read carefully. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.
• Enzymes provide a particularly effective action at temperatures around 50°C, and as a result detergents containing enzymes can be used in conjunction with low-temperature wash cycles in order to achieve the same results as a normal 65°C wash cycle. • To avoid wasting detergent, use the product in appropriate quantities based on the manufacturer’s recommendations, the hardness of the water and the soil level and quantity of the crockery.
Installation GB If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. Positioning and levelling 1. Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed any further with the installation process. 2.
The Company shall not be held responsible for any incidents that occur if these regulations are not observed. If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance). Anti-condensation strip* The water pressure must be within the values indicated in the Technical data table (see Installation).
• If fitting an under sink waste disposal unit, cut out the membrane, bung or blanking plug. GB Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood. Fit hose to waste securely using a “Jubilee” type clip. Anti-flooding protection* To ensure floods do not occur, the dishwasher: - is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.
Description of the appliance Overall view GB 1. Upper rack 2. Upper sprayer arm 3. Tip-up dispensers 4. Rack height adjuster 5. Lower rack 6. Lower sprayer arm 7. Washing filter 8. Salt dispenser 9. Detergent and rinse-aid dispensers and device Active Oxigen* 10. Data plate 11. Control panel**** 12.
Loading the racks GB Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No preventive rinsing is needed under running water. Arrange the crockery so that it is held in place firmly and does not tip over and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.
Tip-up compartments with adjustable position The side tip-up compartments can be positioned at three different heights to optimize the arrangement of crockery inside the rack. Wine glasses can be placed safely in the tip-up compartments by inserting the stem of each glass into the corresponding slots.
Start-up and use GB Starting the dishwasher 1. Turn the water tap on. 2. Press the ON/OFF button: The ON/OFF indicator light and the display light up. 3. Open the door and pour in a suitable amount of detergent (see Measuring out the detergent). 4. Load the racks (see Loading the racks) and shut the door. 5. Select the wash cycle in accordance with the type of crockery and its soil level (see Table of wash cycles) by pressing the wash-cycle selection buttons. 6.
Wash cycles The number and type of wash cycles and options may vary depending on the dishwasher model. GB Wash cycle Wash cycles with drying Options Approximate duration of wash cycles 1. Eco* Yes Delayed start – Half Load – Tabs – Extra Dry 3:10’ 2. Auto Intensive Yes Delayed start – Half Load – Tabs – Extra Dry Short Time – Zone wash 2:30’ 3. Auto Normal Yes Delayed start – Half Load – Tabs – Extra Dry Short Time – Zone wash 2:00’ 4.
Special wash cycles and Options GB Notes: Optimum performance levels when using the “Fast wash” and “Express 30’” cycles can be achieved by respecting the specified number of place settings. *The Eco wash cycle complies with regulation EN-50242. Although it has a longer duration than other wash cycles, it uses less energy and is less harmful to the environment.
Rinse aid and refined salt Only use products which have been specifically designed for dishwashers. Do not use table/industrial salt or washing-up liquid. Follow the instructions given on the packaging. If using a multi-functional product it is not necessary to add any rinse aid. However, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. (Follow the instructions given on the packaging.
Care and maintenance GB Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel can be cleaned using a non-abrasive cloth which has been dampened with water. Do not use abrasive detergents or . solvents.
Troubleshooting Whenever the appliance fails to work properly, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start or cannot be controlled. • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the cycle. • The appliance has not been plugged in properly. • The dishwasher door has not been shut properly. The door won’t close.
After Sales Service GB After Sales Service Appliance Registration No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us.
Guarantee Guarantee GB 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.
GB 18
GB 19
195111617.
