Operation Manual

hotpoint.co.uk
10
en
OPERATION INSTRUCTION
This microwave oven uses modern electronic
controls to adjust cooking parameters and meet
your cooking needs.
CLOCK SETTING
When the microwave oven is Powered ON, the
oven will display “0:00”. The buzzer will ring once.
1) Press “CLOCK“, the hour gure will ash;
2) Turn the KNOB to adjust the hour gures, the
input time should be within 0--23.
3) Press “CLOCK “, the minute gures will ash.
4) Turn the KNOB to adjust the minute gures,
the input time should be within 0--59.
5) Press “CLOCK “ to nish clock setting. “:” will
ash.
Note:1) The clock function cannot be used
if the clock is not set.
2) During clock setting, the oven will
automatically go back to the previous
status after 1 minute of inactivity.
Note:The upper and lower rows of the
display will show the icons related to
specic active functions.
TIMER
(1) Press “TIMER”, the LED will display 00:00.
(2) Turn the KNOB and enter time on the timer.
(The maximum cooking time is 95 minutes).
(3) Press “START/+30SEC./CONFIRM” to
conrm setting.
(4) When the time ends, the buzzer rings 5 times.
If the clock has been set (24-hour system), LED
will display the current time.
While the timer is in operation, no other
program can be set.
Note:The upper and lower rows of the
display will show the icons related to
specic active functions.
MICROWAVE COOKING
1) Press the “MICROWAVE” button once, and
“P100” display.
2) Press “MICROWAVE” repeatedly or turn the
KNOB to select the microwave power; “P100”,
“P80”, “P50”, “P30”, “P10” will display in order.
3) Press “START/+30SEC./CONFIRM“ to
conrm.
4) Turn the KNOB to adjust cooking time. (Time
setting should be 0:05- 95:00.)
5) Press “START/+30SEC./CONFIRM” to start
cooking.
Note: the time intervals when adjusting the
cooking time in the timer knob are as
follows:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
MICROWAVE POWER CHART
Microwave Power 100% 80% 50% 30% 10%
Display P100 P80 P50 P30 P10
Note:The upper and lower rows of the
display will show the icons related to
specic active functions.
MULTI-STAGE COOKING
The maximum cooking stage number is two.
Always select defrost as rst cooking stage. The
buzzer will ring once after each stage and the next
stage will begin.
Note: Auto menu cannot be set as part of
the multi-stage.
Example: follow the steps below to defrost food
for 5 minutes, and then cook with 80% microwave
power for 7 minutes:
1) Press “TIME DEFROST”, the screen will
display “dEF2”;
2) Turn the KNOB to adjust defrost time by 5
minutes;
3) Press “MICROWAVE” once;
4) Turn the KNOB to choose 80% microwave
power until “P80” is displayed;
5) Press “START/+30SEC./CONFIRM” to conrm;
6) Turn the KNOB to adjust the cooking time by
7 minutes;
7) Press “START/+30SEC./CONFIRM” to start
cooking.
Note:The upper and lower rows of the
display will show the icons related to