Quick Specs

AH11E07D3B
Hotpoint
®
PTAC with Electric Heat 20 amps, 230/208 Volt
Specification Revised 11/18
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Hotpoint product questions, visit our website at
hotpoint.com or call 800.626.2000.
ELECTRICAL WIRING
All wiring, including installation of receptacle, must
be made in accordance with local electrical codes
and regulations.
NOTE: Aluminum wiring may pose special problems –
consult a qualified electrician.
GRILLE OPTIONS
Stamped Aluminum Grille – RAG70
ELECTRICAL CONNECTION
230/208 volt units must be plugged into a receptacle. Installation
must comply with local electrical codes and regulations.
Power cord is permanently attached on all Hotpoint chassis.
MAXIMUM CORD EXTENSION
WALL CASE DIMENSIONS
RAB80 WALL SLEEVE
Heavy-gauge galvanized steel, with
insulation, for quick self-assembly.
A – 42", B – 13-3/4", C – 16"
WALL OPENING DIMENSIONS
Add 1/4" to A and C dimensions
for all cut-outs.
RAB80 16-1/4" Min. H x 42-1/4" Min. W
AH11 HEATER KW
230/208 VOLT LINE CORD CONNECTED UNITS
Heater Watts 3604.5/2966
Heater BTU 10900/8900
Heater Amps 15.7/14.3
Min Circuit 20
Recommended
Protective Device
20 amp time-delay fuse or breaker
A
C
B
Wall Case Dimensions Maximum Cord Extension
(in inches)
70"
30"
Wall Opening Dimensions
Add 1/4" to A and C dimensions for all cut-out size.
RAB80 16-1/4" Min. H x 42-1/4" Min. W
RAB80 Wall Sleeve
Heavy-gauge galvanized steel, snap together, with insulation
A - 42", B -13-3/4", C - 16"
AH11E07D3B, AH11E09D3B, AH11E12D3B, AH11E15D3B,
AH11H07D3B, AH11H09D3B, AH11H12D3B, AH11H15D3B
A
C
B
Wall Case Dimensions Maximum Cord Extension
(in inches)
70"
30"
Wall Opening Dimensions
Add 1/4" to A and C dimensions for all cut-out size.
RAB80 16-1/4" Min. H x 42-1/4" Min. W
RAB80 Wall Sleeve
Heavy-gauge galvanized steel, snap together, with insulation
A - 42", B -13-3/4", C - 16"
AH11E07D3B, AH11E09D3B, AH11E12D3B, AH11E15D3B,
AH11H07D3B, AH11H09D3B, AH11H12D3B, AH11H15D3B