Quick Specs

AH11H09D3B
Hotpoint
®
PTAC Heat Pump Unit with Electric Heat Backup 20 amps, 230/208 Volt
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Hotpoint product questions, visit our website at
hotpoint.com or call 800.626.2000. Specification Revised 11/18
ELECTRICAL WIRING
All wiring, including installation of receptacle, must
be made in accordance with local electrical codes
and regulations.
NOTE: Aluminum wiring may pose special problems –
consult a qualified electrician.
GRILLE OPTIONS
Stamped Aluminum Grille – RAG70
ELECTRICAL CONNECTION
230/208 volt units must be plugged into a receptacle. Installation
must comply with local electrical codes and regulations.
Power cord is permanently attached on all Hotpoint chassis.
MAXIMUM CORD EXTENSION
WALL CASE DIMENSIONS
RAB80 WALL SLEEVE
Heavy-gauge galvanized steel, with
insulation, for quick self-assembly.
A – 42", B – 13-3/4", C – 16"
WALL OPENING DIMENSIONS
Add 1/4" to A and C dimensions
for all cut-outs.
RAB80 16-1/4" Min. H x 42-1/4" Min. W
AH11 HEATER KW
230/208 VOLT LINE CORD CONNECTED UNITS
Heater Watts 3604.5/2966
Heater BTU 10900/8900
Heater Amps 15.7/14.3
Min Circuit 20
Recommended
Protective Device
20 amp time-delay fuse or breaker
A
C
B
Wall Case Dimensions Maximum Cord Extension
(in inches)
70"
30"
Wall Opening Dimensions
Add 1/4" to A and C dimensions for all cut-out size.
RAB80 16-1/4" Min. H x 42-1/4" Min. W
RAB80 Wall Sleeve
Heavy-gauge galvanized steel, snap together, with insulation
A - 42", B -13-3/4", C - 16"
AH11E07D3B, AH11E09D3B, AH11E12D3B, AH11E15D3B,
AH11H07D3B, AH11H09D3B, AH11H12D3B, AH11H15D3B
A
C
B
Wall Case Dimensions Maximum Cord Extension
(in inches)
70"
30"
Wall Opening Dimensions
Add 1/4" to A and C dimensions for all cut-out size.
RAB80 16-1/4" Min. H x 42-1/4" Min. W
RAB80 Wall Sleeve
Heavy-gauge galvanized steel, snap together, with insulation
A - 42", B -13-3/4", C - 16"
AH11E07D3B, AH11E09D3B, AH11E12D3B, AH11E15D3B,
AH11H07D3B, AH11H09D3B, AH11H12D3B, AH11H15D3B