Instruction for Use

ManualsBrandsHotpoint ManualsOtherAKR 045/IX

INSTRUCTIONS FOR USE

BEFORE USING THE GRIDDLE

INSTALLATION - TECHNICAL INFORMATION FOR THE

INSTALLER

PROTECTING THE ENVIRONMENT

PRECAUTIONS AND GENERAL RECOMMENDATIONS

CARE AND MAINTENANCE

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

3gb66039.fm Page 34 Friday, June 13, 2003 5:12 PM

Summary of content (5 pages)

PAGE 1
3gb66039.
PAGE 2
3gb66039.fm Page 35 Friday, June 13, 2003 5:12 PM BEFORE USING THE GRIDDLE • To make the most of your new appliance, please read the user instructions carefully and keep them to handy for future consultation. INSTALLATION - TECHNICAL INFORMATION FOR THE INSTALLER • Make sure that the appliance is installed and connected to the electricity supply by a qualified technician in accordance with the manufacturer’s instructions and in compliance with local regulations.
PAGE 3
gb66039.fm Page 36 Friday, June 13, 2003 5:12 PM Electrical Connection • The installer is responsible for the correct electrical connection of the appliance and the observance of the relative safety prescriptions. • The appliance must be connected to the mains, checking first of all that the voltage corresponds to the value given on the rating plate and that the section of the electrical wires can take the load indicated on the rating plate.
PAGE 4
3gb66039.fm Page 37 Friday, June 13, 2003 5:12 PM PROTECTING THE ENVIRONMENT 1. Packing The packaging material is entirely recyclable, as confirmed by the recycling symbol . 2. Products The appliances are built from recyclable materials. If you decide to scrap the appliances act responsibly and observe local waste disposal by laws. Cut off the power cords so that the appliances cannot be connected to the mains.
PAGE 5
3gb66039.fm Page 38 Friday, June 13, 2003 5:12 PM TROUBLESHOOTING GUIDE The griddle does not work: • Is there a power cut? • Has the control knob been turned to the correct power? • Set the main disconnect switch upline of the appliance to “OFF” for a few minutes and then back to “ON” and see if the problem persists. AFTER-SALES SERVICE Before contacting AFTER-SALES SERVICE 1. Try to solve the problem (see “Troubleshooting Guide”). 2. Turn off the appliance and restart it to see if the fault is repeated.