Setup and user guide

EN
Quick guide
THANK YOU FOR BUYING AN HOTPOINT-ARISTON
PRODUCT
In order to receive a more complete assistance, please
register your product on www . hotpoint . eu/ register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch o the acoustic alarms.
CONTROL PANEL
3.5.7. 6.
2.
4.
1. 1. Freezer and refrigerator compartment
temperature indicator
2. Fast cool - "Active Oxygen" button
3. On/stand-by
4. Alarm indicator
5. Turning o the sound alarm
6. Black out alarm indicator
7. Temperature button
"ACTIVE OXYGEN" FUNCTION
Through the emission of a small quantity of ozone, this function
enables a reduction in the proliferation of bacteria and microorganisms
inside the refrigertor and limits bad odours. When the function is
activated, a coloured light will appear on the device, according to the
following cyclical features:
Green light: ozone emission phase
Blue light: antibacterial and anti-odour action phase (without
ozone emission)
To deactivate the function, simply press the O
3
button on the control
panel.
Note: when the Active Oxygen function is activated, a faint odour might
be perceived inside the refrigertor (the same odour that sometimes
accompanies a thunder storm due to the zone produced by the lightning):
it is absolutely normal.
Note: Disabling the function optimizes energy consumption. Keep the
bottle rack grid in the upper parts of the comparison to optimize the
fuction.
FAN*
The Fan improves temperature distribution inside the product,
allowing better preservation of stored food and reduction of excess
humidity. By default, the fan is switched on. You can turn the fan on/
o by pressing for 3 seconds
and buttons. The temperature
indicator will ash and a sound signal is activated one times if the
fan is OFF or the temperature indicator will ash and a sound signal
is activated two times if the fan is ON. If the ambient temperature
exceeds 27°C, or if drops of water are present on the glass shelves,
it is essential that the fan is on to ensure the proper preservation of
the food. Deactivation of the fan allows energy consumption to be
optimised.
Note: the fan restarts automatically after a power cut or after turning o
the appliance. Do not obstruct the air intake area with food items.
ON/STANDBY
Press the button for 3 seconds to turn the appliance o. Press
the button again briey to reactivate the appliance.
Note: this does not disconnect the appliance from the power supply.
FREEZER AND REFRIGERATOR
COMPARTMENT TEMPERATURE
It is possible to set a dierent temperature of the appliance by pressing
the "Temp." button.
LEDs lit Set temperature
High Low
Low (colder)
Medium-low
Medium
Medium-high
High (less cold)
FAST COOL
Press the button
for 3 seconds before placing a large quantity of
fresh food in the refrigerator compartment. When the function is
turned on the icon light up. The function turns o automatically after
36 hours, or manually by pressing the button again for 3 seconds.
TURNING OFF THE SOUND ALARM
To turn o the sound alarm, briey press the
button.
* Available only on certain models

Summary of content (4 pages)