Use and care guide

6
This appliance has been designed,
constructed and distributed in
compliance with the requirements of
European Directives:
LVD 2014/35/EU, EMC 2014/30/EU and
Ro HS 2011/65/EU.
This appliance has been designed,
constructed and distributed in
compliance with the Ecodesign and
energy Labeling Requirements of
ECDirectives: 2009/125/EC and
2010/30/EU.
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is 100%
recyclable and is marked with the
recycle symbol
. The various parts
of the packaging must therefore be
disposed of responsibility and in full
compliance with local authority
regulations governing waste disposal.
SCRAPPING OF HOUSEHOLD
APPLIANCES
When scrapping the appliance, make
it unusable by cutting o the power
cable and removing the doors and
shelves (if present) so that children
cannot easily climb inside and
become trapped.
This appliance is manufactured with
recyclable
or reusable materials.
Dispose of it in accordance with local
waste disposal regulations.
For further information on the
treatment, recovery and recycling of
household electrical appliances,
contact your competent local
authority, the collection service for
household waste or the store where
you purchase the appliance.
This appliance is marked in
compliance with European Directive
2012/19/EU, Waste Electrical and
Electronic Equipment (WEEE).
By ensuring this product is disposed
of correctly, you will help prevent
potential negative consequences for
the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product.
The symbol
on the product or on
the accompanying documentation
indicates that it should not be treated
as domestic waste but must be taken
to an appropriate collection center for
the recycling of electrical and
electronic equipment.
ENERGY SAVING TIPS
Install the appliance in a dry, well
ventilated room far away from any
heat source (eg. radiator, cooker, etc.)
and in place not exposed directly to
the sun. If required, use an insulating
plate.
To guarantee adequate ventilation
follow installation instructions.
Insucient ventilation on back of the
product increases energy
consumption and decreases cooling
eciency.
Frequent door opening might cause
an increase in Energy consumption.
The internal temperatures of the
appliance and the Energy
Consumption may be aected by the
ambient temperature, frequency of
door opening, as well as location of
the appliance. Temperature setting
should take into consideration these
factors.
Reduce to a minimum door opening.
When thawing frozen food, place
them in the refrigerator. The low
temperature of the frozen products
cools the food in the refrigerator.
Allow warm food and drinks to cool
down before placing in the appliance.
Positioning of the shelves in the
refrigerator has no impact on the
ecient usage of energy. Food should
be placed on the shelves in such way
to ensure proper air circulation (food
should not touch each other and
distance between food and rear wall
should be kept).
You can increase storage capacity of
frozen food by removing baskets and,
if present, Stop Frost shelve,
maintaining an equivalent energy
consumption.
High energy class products are tted
with high eciency motors that
remain operational for longer, but
have a low power consumption. Do
not worry if the engine continues to
run for longer periods.
DECLARATION OF CONFORMITY
SAFEGUARDING THE ENVIRONMENT