Use and care guide

EN
11
HOW TO INCREASE FREEZER STORAGE CAPACITY • removing the baskets to allow the storage of big
products.
• placing the food products directly on the freezer
shelves.
• removing additional removable accessories.
DAILY USE
• Do not block the air outlet area (on the back wall and
on the bottom inside the product) with food products.
• All shelves and pull-out baskets are removable.
• The internal temperatures of the appliance may be
aected by the ambient temperature, frequency of
door opening, as well as location of the appliance.
Temperature setting should take into consideration
these factors.
• Unless otherwise specied the appliance
accessories are not dishwasher safe.
FUNCTIONS
This function turns On/Stand-by the
refrigerator. To put the product in
Stand-by, press & hold the On/Stand-
by button for 3 seconds.
All the temperature indicators turn o.
When the appliance is in Stand-by,
the light inside the refrigerator
compartment does not work.
Remember that this operation does not
disconnect the appliance from
the power supply.
To switch the appliance On again,
simply press the On/Stand-By button .
The use of this function is recommended
when placing a very high quantity of
food in the refrigerator and freezer
compartments.
Using Super Cool function it is possible
to increase the cooling capacity in the
refrigerator and freezer compartments.
Note: Super Cool function should be also
switched ON before placing fresh food
to be frozen in the freezer compartment,
in order to maximize the freezing
capacity.
ON/STANDBY
SUPER COOL
REMOVING THE FREEZER DRAWER CONTAINER
• Open the freezer door
• Pull the upper container upwards by the right and
left corners (1)
• Remove the drawer (2)
1
2
• Install the upper container in the reverse order