Installation guide
PARTS SUPPLIED IN INSTALLATION
PACKAGE:
[] Two 8-18 x 5/8" Phillips heod wood screws
[] Junction box cover and #10 hex head
screw
[] Drain hose (78" long) and hose clamp
[] Cord protector (Power Cord Models Onlg)
[] Conversion leads (Power Cord Models Onlg)
[] Literature, product samples, and/or
coupons
Screw Kit
Phi,,psHeadHexHead
_S Wood Screws _ Junction Box Screw
5/8" long 1/2" long
Junction Box Cover
78" Drain Hose
Hose Clamp
Cord Protector
(Power Cord Models Onlg)
Conversion Leads
(Power Cord Models Onlg)
MATERIALS YOU WILL NEED:
[] WX09X70910 power cord if applicoble to
gour instollotion
[] UL Listed wire nuts (3)
[] Thread seol tape
[] 90 ° elbow, ferrule ond compression nut
- (3/8" NPT external thread on one end
and opposite end sized to fit water supplg)
[] GPF65 Side-mount brocket kit for use with
granite countertops
FOR NEW INSTALLATIONS:
[] Electrical cable
[] Water line-3/8" minimum copper tubing
[] Strain relief for electricol connection
[] Hond shut-offvalve (recommended)
[] Air gap for drain hose, if required
[] Waste tee for house plumbing, if
applicable
[] GPF10S drain hose (10' long), if needed
[] Screw tgpe hose clamps
TOOLS YOU WILL NEED:
[] Sofetg glosses
[] 1//4" and 5/16" nutdrivers
[] Flashlight
[] Gloves
[] Adjustable wrench (6")
[] Phillips head screwdriver
[] Meosuring tope
[] Level
[] Carpenters square
[] Bucket to catch water when flushing
water line
[] Tubing cutter
[] 15/16" socket wrench
FOR NEW INSTALLATIONS:
[] Hole sow set
[] Drill ond oppropriate bits
2
Electrical Cable
or WR09×70910
Power Cord
3 Wire Nuts
Thread
Shut-Off
Strain Relief Seal Tape Valve
GPF65 Side-Mount
Bracket Kit Air
Gap
Optional 10'
Drain Hose
Waste Tee
GPFIOS
Hot Water Line-3/8"
Minimum Copper
Tubing
90° Elbow, Ferrule and
Compression Nut
Screw Tgpe
Hose Clamps
Safetg Glasses
Gloves
1/4"and 5/16" Nutdrivers Flashlight
Hole Saw Set
Adjustab e _ Phillips Head
... - _ Screwdriver
wrencn -_/_L_L-
Measuring Tape
Level
Drill and
Bits
J
Carpenters
Square
Bucket
Tubing
utter
15116"
SocketWrench