Cooker Hood HE63 HE73 HE93 Instruction on mounting and use
! It is important to conserve this booklet for consultation at any moment. In the case of sale, cession or move, make sure it is together with the product. ! Read the instructions carefully: there is important information about installation, use and safety. ! Do not carry out electrical or mechanical variations on the product or on the discharge conduits. Installation Electric connection ! The power tension must correspond with the tension shown on the characteristics label situated inside the hood.
The minimum distance between the supporting surface for the cooking vessels on the hob and the lowest part of the range hood must be not less than 50cm from electric cookers and 70cm from gas or mixed cookers. If the instructions for installation for the gas hob specify a greater distance, this must be adhered to. Fix the bracket behind the hood near the joining ring (Fig. 4.1a). Note: The bracket can be adjusted horizontally. This is useful for successive small adjustments of the position of the hood (Fig.
Control panel Press to enable all the functions (ON/OFF key). Press to turn the lights on and off. To increase or diminish the suction speed, press keys 1,2 or 3. Press O to interrupt the suction function.
! We advise switching the hood on, at minimum power, before beginning to cook to favour the optimal expulsion of odours. In addition we advise turning it off every time 10/15 minutes after finishing cooking. ! We advise frying under the hood only under constant supervision. ! It is forbidden to cook flambé under the hood because there is the risk of causing a fire. The best performance of the apparatus is obtained with external expulsion: we advise using the hood in this version if possible.
! It is always necessary to isolate the hood from the power supply during cleaning and maintenance. Therefore remove the plug. We recommend carrying our maintenance regularly (about every 10 days) to ensure efficacious and constant performance of the hood. Cleaning the hood Mounting and changing the filter The carbon filter must be changed every 6 months. 1-Remove the fats filter (a.b) 2-Mount the filters as illustrated in the figures below. 3-To dismantle, proceed inversely.
General safety ! The hood has been designed and constructed in conformity with international safety regulations. These warnings are provided for safety reasons and must be carefully read. • This apparatus has been designed for use by adults. • Children and invalids are not allowed to use this apparatus without supervision. Check that children do not play with the apparatus.
LI2S7A
