Extended technical drawing

DIMENSION MEASURE
OVERALL CABINET
01. Height MIN of the base cabinet Niche, including all required space for installation or ventilation (HMIN_B) 820 mm
02. Height MAX of the base cabinet Niche, including all required space for installation or ventilation (HMAN_B) 900 mm
03. Width MIN of the base cabinet Niche, including all required space for installation or ventilation (WMIN_B) 600 mm
04.Width MAX of the base cabinet Niche, including all required space for installation or ventilation (WMAN_B) 608 mm
05. Depth of the base cabinet Niche, including all required space for installation or ventilation (DN_B) 560 mm
06. Indicates whether a ventilation opening is needed or not. Default is "N" No
07. appliance can be used as base for other appliances from the same manufacturer. Default is "N" No
Built In - Floor Standing
08. Height MIN Decorative Front (HMIF) 653 mm
09. Height MAX Decorative Front (HMAF) 720 mm
10. Width MIN Decorative Front (WMIF) 596 mm
11. Weight MAX of the decorative bottom front panel of the Kitchen manufacturer (WEMAF) 10 kg
12. Weight MIN of the decorative front panel of the Kitchen manufacturer (WEMIF) 2 kg
13. Thickness MAX of decorative front panel of the kitchen manufacturers (TMAF) 50 mm
14. Minimum height of gap between front and front underneath, with MAX thickness of front (HMIFG) 3 mm
APPLIANCE
Overall Appliance
01. Height MIN Product (HMIP) 820 mm
02. Height MAX product (HMAP) 900 mm
03. Width product (WP) 598 mm
04. Depth product without front (DP) 555 mm
05. Depth product (D) 0 mm
06. Depth MIN of plinth return front (DMIPRF) 87 mm
07. Depth MAX of plinth return front (DMAPRF) 87 mm
08. Height MIN Plinth return. Dimension is taken by minimum appliance height (HMIMIPR) 93 mm
09. Height MAX Plinth return. Dimension is taken at minimum appliance height (HMIMAPR) 160 mm
10. Height MIN Plinth return. Dimension is taken by maximum appliance height (HMAMIPR) 173 mm
11. Height MAX Plinth return. Dimension is taken at maximum appliance height (HMAMAPR) 240 mm
Built In - Floor Standing
12. Height MIN Product Panel. When product panel is missing, set to 0 (HMIPP) 0 mm
13. Height MAX Product Panel. When product panel is missing, set to 0 (HMAPP) 0 mm
14. Space in front, which is required to guarantee full operability. The most protruding part gives this dimension (RSF) 590 mm
15. Type of preparation to fix the cover door Drilling template
standard
Retrace back socle
16. Depth of the socle retrace at the rear side (DBSR) 48 mm
17. Height of the socle retrace at the rear side. This dimension is taken at minimum appliance height (HBSR) 120 mm
TEMPLATE NAME
00. Name of the template to be used DISH_FULLDOOR60CM
HIC 3C33 CWE UK
12NC/Fx: F160135 GTIN (EAN) code:
5054645601356