Daily Reference Guide

ManualsBrandsHotpoint ManualsAppliancesIntegrated Slim Dishwasher - Silver

APPLIANCE

DAILY REFERENCE

GUIDE

THANK YOU FOR BUYING A HOTPOINT PRODUCT.

In order to receive a more complete assistance, please

You can download the Safety Instructions and the

User

Manual, by visiting our website

docs.hotpoint.eu and

following the Instructions on the back of this booklet.

CONTROL PANEL

Before using the appliance carefully read Safety Instructions guide.

1. Upper rack

2. Foldable aps

3. Upper rack height adjuster

4. Upper spray arm

5. Lower rack

6. Space Zone support

7. Cutlery basket

8. Lower spray arm

9. Filter Assembly

10. Salt reservoir

11. Detergent and Rinse Aid dispensers

12. Rating plate

13. Control panel

0000 000 00000

Service:

1112

1 2 3 4 5 6 7 8 9 10

11 12 13

1. On-O/Reset button with indicator light

2. Program selection button

3. Salt rell indicator light

4. Rinse Aid rell indicator light

5. Program number and delay time indicator

6. Tablet indicator light

7. Display

8. Zone Wash 3D indicator lights

9. Zone Wash 3D button

10. Delay button

11. Short Time button with indicator light

12. Extra Dry button with indicator light

13. Start/Pause button with indicator light / Tablet (Tab)

PRODUCT DESCRIPTION

Summary of content (8 pages)

PAGE 1
EN DAILY REFERENCE GUIDE THANK YOU FOR BUYING A HOTPOINT PRODUCT. In order to receive a more complete assistance, please register your appliance on: www.hotpoint.eu/register You can download the Safety Instructions and the User Manual, by visiting our website docs.hotpoint.eu and following the Instructions on the back of this booklet. Before using the appliance carefully read Safety Instructions guide. PRODUCT DESCRIPTION APPLIANCE 1 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
PAGE 2
FIRST TIME USE SALT, RINSE AID AND DETERGENT ADVICE REGARDING THE FIRST TIME USE After installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack. FILLING THE SALT RESERVOIR The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components. • It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY. • It is important to set the water hardness.
PAGE 3
EN Drying phase PROGRAMS TABLE Program Available options *) Duration of wash program (h:min)**) Water consumption (litres/cycle) Energy consumption (kWh/cycle) 1. Eco 50° 4:00 9.0 0.76 2. Auto Intensive 65° 2:20 - 3:00 16.0 - 18.0 1.20 - 1.40 3. Auto Mixed 55° 2:10 - 2:50 14.5 - 16.0 1.05 - 1.25 4. Delicates 45° 1:40 12.0 1.00 5. Rapid 30’ 50° 0:30 9.0 0.50 6. Good Night 50° 3:35 16.5 1.00 7. Sanitizing 70° 1:40 12.0 1.30 8. Soak 9. Self-Clean - - - 0:10 4.
PAGE 4
OPTIONS AND FUNCTIONS OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected program see PROGRAMS TABLE, the corresponding LED flashes rapidly 3 times and beeps will sound. The option will not be enabled. ZONE WASH 3D Option works with one rack at once.
PAGE 5
EN LOADING THE RACKS UPPER RACK Load delicate and light dishes: glasses, cups, saucers, low salad bowls. The upper rack has tip-up supports which can be used in a vertical position when arranging tea/ dessert saucers or in a lower position to load bowls and food containers. LOWER RACK For pots, lids, plates, salad bowls, cutlery etc. Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm.
PAGE 6
DAILY USE 1. CHECK WATER CONNECTION Check that the dishwasher is connected to the water supply and that the tap is open. 2. SWITCH ON THE DISHWASHER Open the door and press the ON/OFF button. 3. LOAD THE RACKS (see LOADING THE RACKS). 4. FILLING THE DETERGENT DISPENSER 5. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE Select the most appropriate program in accordance with the type of crockery and its soiling level (see PROGRAMS DESCRIPTION) by pressing the P button.
PAGE 7
EN CARE AND MAINTENANCE CLEANING THE FILTER ASSEMBLY CLEANING THE SPRAY ARMS Regularly clean the filter assembly so that the filters do not clog and that the waste water flows away correctly. Using dishwasher with clogged filters or foreign objects inside filtration system or sprayarms may cause unit malfunction resulting in lose of performance, noisy work or higher resources usage.
PAGE 8
TROUBLESHOOTING In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues please contact authorized After-sales Service which contact details can be found in the warranty booklet. The manufacturer ensures the availability of spare parts for at least 10 years after production date of this appliance. PROBLEMS POSSIBLE CAUSES SOLUTIONS Salt indicator is lit Salt reservoir is empty.