Operating instructions

8
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Start-up and use
! The first time you use your appliance, heat the empty
oven with its door closed at its maximum temperature
for at least two hours. Make sure that the room is well
ventilated before switching the oven off and opening the
oven door. The appliance may emit a slightly unpleasant
odour caused by protective substances used during the
manufacturing process burning away.
! To make the setting process easier, press and hold
the + and – buttons to scroll through the numbers on
the display rapidly.
! Each setting will automatically be stored in the appliance
memory after 10 seconds.
! The touch controls cannot be activated if the user is
wearing gloves.
Control panel lock
! The control panel can be locked once the cooking has
finished and during cooking.
To lock the oven controls, press and hold the
button
for at least 2 seconds. A buzzer will sound and the
TEMPERATURE display shows the key symbol “O—n”.
The icon will light up to indicate lock activation.
To deactivate the lock, press and hold the button
again for at least 2 seconds.
Setting the clock
! The clock can only be set when the oven is switched off.
If the oven is in standby mode, pressing the
button
once will display the current time setting. Press it again
to set the time.
After connection to the power supply network or after
a blackout, the
button and on the TIME display will
flash for 10 seconds.
To set the clock:
1. Press the
button.
2. Adjust the hour figure using the
+ and - buttons.
3. Once you have reached the correct hour value, press
the
button.
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the clock.
If the
icon flashes on the display, this indicates that
the clock has not been set correctly.
Setting the minute minder
! The minute minder may be set regardless of whether
the oven is switched on or off. It does not switch the
oven on or off.
When the set time has elapsed, the timer emits a buzzer
that will automatically stop after 30 seconds or when any
active button on the control panel is pressed.
To set the minute minder proceed as follows:
1. Press button
.
2. Set the desired time using buttons
+ and -.
3. Once you have reached the desired value, press the
button again.
The lit
symbol will remind you that the minute minder
is on.
To cancel the minute minder, press the
button and
use the + and – buttons to set the time to 00:00. Press
button
again.
The
icon will switch off to indicate that the minute
minder has been disabled.
Starting the oven
1. Switch the control panel on by pressing the button.
The appliance buzzer sounds three times (ascending)
and all buttons light up in sequence.
2. Select the TOP/GRILL or MAIN oven by pressing the
TOP OVEN/ GRILL or MAIN OVEN icon
3. Press the button corresponding to the desired cooking
mode. The TEMPERATURE display shows:
- the temperature associated with the mode, if
programming manually;
- “Auto”, if programming is automatic.
The TIME display shows:
- the current time, if programming manually;
- the duration, if programming is automatic.
4. Press the
button to begin cooking.
5. The oven will begin its preheating phase, the preheating
indicators will light up as the temperature rises.
6. When the preheating process has finished, a buzzer
sounds and all the preheating indicator lights show that
this stage has been completed: the food can then be
placed in the oven.