Instruction for Use

EN
12
Special wash cycles and Options
Option ACTIVE OXYGEN
Thisdevicereleasesozonemoleculesintothedishwasher,
i.e. a natural substance that reduces unpleasant odours.
ItshouldbeusedbetweentwodifferentwashcyclesandONLY
after soiled crockery has been loaded.
TostarttheACTIVEOXYGENoptionpressandholdthebutton
O
3.
Theoptionwillstayactiveeitherfor24hours oruntilthe
wash cycle is started. More items can be introduced at any
time until full load.
The typical faint odour that can be smelt inside the dishwasher -
thesameasyousometimesgetwithstorms-isduetotheozone
produced by lightning discharges. This is normal. The device
producesjustasmallquantity,whichsoondecays.
Noreplacementneeded.
Delayed Start option
It is possible to delay the start of the cycle for a period
of time between 1 and 24 hours.
1. After selecting the desired wash cycle and any other options,
presstheDELAYEDSTARTbutton:theindicatorlightwillgoon.
PresstheDELAYEDSTARTbuttontoselectthetimeatwhich
youwishthewashcycletobegin(1to24hours.)
2.Confirm your selection using the Start/Pause button; the
countdown will begin. The selected delay period is displayed.
3.Oncethistimehaselapsed,theDELAYEDSTARTindicator
light goes off and the wash cycle begins.
Todeselectit,pressandholddowntheDELAYEDSTARTbutton
until the text OFF appears.
The Delayed Start function cannot be set once a wash
cycle has been started.
Wash options*
The OPTIONS may only be set, changed or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected wash cycle
(see Table of wash cycles) , the
correspondingsymbol/indicatorlightflashesrapidly3times.
If an option is selected which is not compatible with another
previously-selected option, it will flash 3 times and go off,
while the most recently selected option will remain active.
To deselect an option which has been set by mistake, press
the corresponding button again.
Multi-Functional Tablets option (Tabs)
This option optimises washing and drying results.
Whenusing multi-functional tablets,press the MULTI-
FUNCTIONALTABLETSbutton;thecorrespondingsymbol
will light up. If the button is pressed again, the option will
be deselected.
The Multi-Functional Tablets option results in a longer
wash cycle.
The use of tablets is only recommended in models
having this option and it is not recommended with wash
cycles which do not specify the use of multi-functional
tablets.
Notes:
Optimumperformancelevelswhenusingthe“Fast"and"Express
30’”cyclescanbeachievedbyrespectingthespecifiednumber
of place settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories:
forinformationoncomparativeEN
testing conditions, please send an email to the following address:
[e-mail]
Zone Wash
This option makes it possible to carry out the wash
cycle in the selected rack only. Select the wash cycle and
thenpresstheZONEWASHbutton:theselectedracklights
up and the wash cycle starts in the selected rack only. Press
the button again to deselect the option.
The option is available with the following wash cycles:
Intensive and Normal.
Select the option and the Intensive cycle to start the
ULTRAINTENSIVEZONEwashing.Thiswashcycleisideal
for very soiled mixed loads, e.g. pans and saucepans,
dishes with heavy encrustation or difficult-to-clean crockery
(grater, vegetable mill, dirty cutlery). The spraying pressure is
stronger and the washing temperature higher, thus ensuring
optimum handling of stubborn stains.
Select the option and the Normal
cycletostarttheSAVING
ZONEwashing.Thisfunctionmakesitpossibletoreduce
energy consumption. Cycle duration might change
Remember to load the crockery in the selected rack only