Quick Specification Sheet

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
RBS330DR
Hotpoint 30" Free-Standing Electric Range
All GE Appliances ranges are equipped
with an Anti-Tip device. The installation
of this device is an important, required
step in the installation of the range.
For answers to your Hotpoint product questions, visit our website at
hotpoint.com or call 800.626.2000. Specification Revised 2/22
RECEPTACLE LOCATIONS
Locally approved flexible service cord or conduit must
be used because terminals are not accessible after range
installation. See shaded area in drawing for location of
electrical outlet box. Recommended outlet locations allow
range to be installed directly against wall.
NOTE: This appliance has been approved for 0" spacing
to adjacent surfaces above the cooktop. However, a 6"
minimum spacing to surfaces less than 15" above the
cooktop and adjacent cabinet is recommended to reduce
exposure to steam, grease splatter and heat.
INSTALL ATION INFORMATION: Before installing,
consult installation instructions for current dimensional
data and additional requirements.
†
NOTE: Check local codes for required
breaker size.
KW RATING
240V 10.2
208V 7.6
BREAKER SIZE
240V 40 Amps†
208V 40 Amps†
29-7/8"
36"
to
36-1/2
"
11"
46-3/4"
29"
26-1/4"
47"
w/handle
w/o handle
CENTER LINE
REAR
WALL
2-1/4"
7-1/2"
7"
7-1/2"
3-1/2"
2-1/4"
5"
30
" FREE-STANDING ELECTRIC
SINGLE OVEN RANGE
29-7/8"
36"
to
36-1/2"
11"
46-3/4"
29"
26-1/4"
47"
w/handle
w/o handle
CENTER LINE
REAR
WALL
2-1/4"
7-1/2"
7"
7-1/2"
3-1/2"
2-1/4"
5"
30
" FREE-STANDING ELECTRIC
SINGLE OVEN RANGE