Installation guide

Installation Instructions
TOOLS YOU WILL NEED
# 1 and #2 Phillips screwdriver
PenciI
Ruleror tape measureand
_t edge
Tinsnips(forcutting
damper,if required)
Gloves
Safety goggles
Scissors
(to cut template, if necessary)
Saw (saber,hole or keyhole)
Electric drill with 3AZ',V2"and %"
ddll bits
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Stud finder e[ Hammer (optional)
I Duct and masking tape
Level
MOUNTING SPACE
66" or More
fremtbe Floor
to the Top of
the Microwave
_J Bottom Edge of
Cabinet Needsto
_be30" or More
from the Cooking
Su_ace
NOTES:
• The space between tile cabinels Inost be
30" wide and free of obs/rucdons.
• If tile space between the cabinets is greater
than 30", a Filler Panel Kit may be used to fill
in the gap between the Inicrowave oven and
the cabinets. Your Owner's Manual contains
the kit mnnber for your model.
• This microwave oven is for installation over
ranges up to 36" wide.
• If you are going to vent your microwave oven
to the outside, see Hood Exhmlst Section for
exhaust duct preparation.
• When installing the microwave oven beneath
smooth, flat cabinets, be careful to follow the
instructions on the top cabinet template for
power cord clearance.
7