EN Operating Instructions
17 18 19 20 16 1 2 17 16 3 18 4 5 20 14 6 15 13 7a 8 12 7 22 9 10 11 21 21 SG E12 AA0 UK | SG DC11 AA0 UK | SG DC11 AA1 UK SG C10 AA0 UK
A B C D
E F G H I 11 J
K L
en GENERAL SAFETY INSTRUCTIONS • • • • • • • • • • If the plug, power cord or appliance appear to be damaged or if any visible damage or water leaks are found, do not operate the iron. In such cases have it checked by Hotpoint’s authorised staff in order to avoid any hazardous situation. If the appliance was dropped, do not operate it.
en DESCRIPTION OF THE APPLIANCE 1. 2. 3. 4. 5. 6. 7. 7a. 8. 9. Power cord holder Temperature indicator light Iron Soleplate Iron supporting base Boiler Plastic protection lid Boiler closing cap Water reservoir Cord-rewinding clip INTRODUCTION Welcome to Hotpoint's Garment Care. Thank you for purchasing our new Power Perfection steam generator. We recommend registering this product on www.hotpoint.eu to make sure you are entitled to all the benefits made available by Hotpoint's Customer Service.
en • use of the appliance. Use the supplied mat with compact generator, and keep iron in a horizontal position. Replacing the fuse When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.
en process and in the good operation of the appliance over a long lifespan. In particular, a high concentration of limescale may damage some parts of the iron and cause its early deterioration. USING YOUR IRON Power Perfection water tank has a capacity of 1000ml with extra 200ml boiler. If your Power Perfection is equipped with the Optimal Soleplate Temperature technology, you need not adjust the temperature.
en 3. Fabrics with this symbol on the label must not be ironed. GARMENT LABEL FABRIC TYPE synthetic TEMPERATURE INDICATION MIN silk mixed cotton STEAM INDICATION Min Min Wait for the temperature indicator light to turn off and for the Steam Ready indicator light to turn on, before pressing the steam button. Ironing with shot of steam (F) The shot-of-steam function is useful to iron out any persistent wrinkles through a uniform emission of steam onto the fabrics.
en steam quantity needed to iron your garments. To start the Eco function set the steam control (16) to Eco ( ). When the Steam Ready indicator light (20) turns on, you can start steam ironing. 2. 3. Automatic switch-off function (I) The automatic switch-off function ensures total safety. This function automatically switches off the steam generator when it is not used for a few minutes.
en 4. 5. 6. 7. 8. 9. Empty the boiler of any residual water. Fill the boiler with 500 ml of water. Then close, shake the steam generator and empty it. Repeat the operation at least twice. Close the boiler, making sure its closing cap has been fastened all the way. Then re-place the protection plastic lid. Re-place the boiler in its ordinary usage position. Connect the appliance to a socket and press the ON/OFF button (18).
en TROUBLESHOOTING Problem Possible causes / Solutions The soleplate stays cold and does not warm up. • • The plug was not inserted or is not making contact. Make sure the temperature is not set to Min. The temperature indicator light goes on and off. • The temperature indicator light is on. This shows that the iron is warming up. The indicator light will turn off when the set temperature is reached. Steam comes out in a reduced quantity or does not come out at all.
en The no-water indicator light is on. • • The water reservoir needs filling. The water reservoir was not fitted correctly. Place the water reservoir in the relevant housing until it clicks into place. The Steam Ready indicator light turns on and off. • The Steam Ready indicator light turns on to show that the steam generator has reached the desired steam settings. When you use the steam function, the indicator light turns off. It turns on again when such settings are reached again.
en GUARANTEE 12 months Parts and Labour Guarantee This certificate of guarantee represents the guarantee (“Guarantee” hereinafter) offered by Indesit Company UK Limited with registered office at Peterborough PE2 9JB in relation to products purchased in the United Kingdom and Indesit Ireland Limited with registered office in Dublin 9, Ireland for products purchased in the Republic of Ireland. This Guarantee does not affect your statutory rights.
www.indesitcompany.com Power Perfection UK 03/2014 - ver.3.