Instruction for Use

GB
11
Personalisation
Setting the temperature
By pressing the TEMPERATURE button to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash ( ).
The washer-dryer will automatically prevent you from selecting a temperature which is higher than the maximum value
set for each wash cycle.
Setting the drying cycle
The desired drying cycle type may be set by pressing the DRYING button once or several times. Two options are availa-
ble:
A - Based on time: from 40 to 180 minutes.
B - Based on the how damp the clothes are once they have been dried:
Iron dry : slightly damp clothes, easy to iron.
Cupboard dry : very dry clothes, recommended for towelling and bathrobes.
If your laundry load to be washed and dried is much greater than the maximum stated load (see Table of wash cycles),
perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in
the drum. At this point, follow the instructions provided for a “Drying only” cycle. Repeat this procedure for the remain-
der of the load.
N.B.: when the drying is complete there is a cooling period, even though the DRYING button is in the 0 position.
Drying only
Turn the WASH CYCLE knob to one of the drying settings (11-12-13) according to the type of fabric, then select the
desired drying duration using the DRYING button.
Functions
The various wash functions available with this Washer-dryer will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note:
- If the selected function is not compatible with the programmed wash cycle, the corresponding indicator light will
flash, a sound signal will be emitted and the function will not be activated..
- If a function which is incompatible with another function selected previously, only the most recent selection will
remain active.
Delay Start
To set a delayed start for the selected wash cycle, press the button repeatedly until the desired delay time is displayed
(this may be between 1 hour and 24 hours).
To disable the function press the button until the text is displayed.
N.B. Once you have pressed the START/PAUSE button, the delay time may only be decreased if you wish to modify it.
Mini Load
This function is recommended for when the load of laundry is equal to half, or less than half, of the maximum recom-
mended load (see Table of wash cycles).
Super Wash
Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle dura-
tion, this function offers a high-performance wash.
Slow Spin (1400-600)
By selecting this function, reduces the spin speed.