User's Manual
Table Of Contents
- 1 Safety instructions
- 2 Markings used
- 3 Application
- 4 Structure and mode of operation
- 5 Mechanical installation
- 6 Electrical connection
- 7 Shunt signal
- 8 Functionality testing
- 9 Loading capacity
- 10 Maintenance
- 11 Waste disposal and environmental protection
- 12 Dimensions
- 13 Order numbers, accessories
- 14 Specifications
- 15 Supplementary technical information
8
Symbol
Meaning
This marking draws your attention to
information about the product or about
handling the product.
Emphasis
Italics are used to emphasize and highlight
texts
.
3
Application
The torque flange measures static and dynamic torques on stationary and rotating shafts.
Test beds can be extremely compact because of the short construction of the transducer.
This offers a very wide range of applications.
The torque flange is reliably protected against electromagnetic interference. It has been
constructed according to the relevant European standards (e.g. EMC behavior) and/or
complies with US and Canadian standards. The product carries the FCC label.
This transducer is solely designed and may only be used for the following system types:
• MTU Marine test benches according to Request MPZ1006008 / MPZ1006009
Version b 13.01.2015 HBM: public