User's Manual
Table Of Contents
- 1 Safety instructions
- 2 Markings used
- 3 Application
- 4 Structure and mode of operation
- 5 Mechanical installation
- 6 Electrical connection
- 7 Shunt signal
- 8 Functionality testing
- 9 Loading capacity
- 10 Maintenance
- 11 Waste disposal and environmental protection
- 12 Dimensions
- 13 Order numbers, accessories
- 14 Specifications
- 15 Supplementary technical information
22
Speed measuring system
sensor
head alignment
The speed measuring system is correctly aligned when the stator is precisely aligned for
the torque measurement. So the two Allen screws on the sensor head (Fig. 5.16) must
not be loosened.
Important
You must not change the position of the sensor head.
Never loosen the
screws!
Sensor head for
measuring the speed
Fig. 5.16: Torque transducer with sensor head for speed measurement
Version b 13.01.2015 HBM: public