User's Manual

Markings used
T40FM A3276-8.0 HBM: public 11
2 Markings used
2.1 Symbols on the transducer
Read and note the data in this manual
CE mark
The CE mark enables the manufacturer to guarantee that
the product complies with the requirements of the relev
ant EC directives (the Declaration of Conformity can be
found on the HBM website at www.hbm.com under HBM
doc).
Label example
Label example with FCC ID and IC number. Location of
the label on the stator device.
Statutory waste disposal mark
The electrical and electronic devices that bear this sym
bol are subject to the European waste electrical and elec
tronic equipment directive 2002/96/EC. The symbol indic
ates that, in accordance with national and local
environmental protection and material recovery and re
cycling regulations, old devices that can no longer be
used must be disposed of separately and not with normal
household garbage, see also Chapter 11, Page 59.
Model: T40S7
FCC ID: 2ADAT-T40S7TOS9
IC: 12438AT40S7TOS9
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interfer
ence received, including interference that
may cause undesired operation.