User's Manual
Table Of Contents
- T40FM
- T40FM
- English
- 1 Safety information
- 2 Markings used
- 3 Applications
- 4 Structure and Mode of Operation
- 5 Mechanical installation
- 6 Electrical Connection
- 7 Shunt signal
- 8 Functionality testing
- 9 Loading capacity
- 10 Maintenance
- 11 Waste disposal and environmental protection
- 12 Dimensions
- 13 Order numbers, Accessories
- 14 Specifications
- 15 Supplementary Technical Information
- English
- T40FM
- Deutsch
- 1 Sicherheitshinweise
- 2 Verwendete Kennzeichnungen
- 3 Anwendung
- 4 Aufbau und Wirkungsweise
- 5 Mechanischer Einbau
- 6 Elektrischer Anschluss
- 7 Shuntsignal
- 8 Funktionsprüfung
- 9 Belastbarkeit
- 10 Wartung
- 11 Entsorgung und Umweltschutz
- 12 Abmessungen
- 13 Bestellnummern, Zubehör
- 14 Technische Daten
- 15 Ergänzende technische Informationen
- Deutsch
Electrical Connection
T40FM A3276-8.0 HBM: public 43
S Should differences in potential between the machine
rotor and stator, because of unchecked leakage, for
example, cause interference, this can usually be over
come by connecting the rotor definitively to ground,
e.g. with a wire loop. The stator must be connected to
the same (ground) potential.
6.3 Pin Assignment
The stator housing has two 7-pin plugs, an 8-pin plug and
a 16-pin plug.
The supply voltage connections and shunt signal connec
tions of plugs 1 and 3 are each electrically interconnec
ted, but are protected against compensating currents by
diodes. There is also a self-resetting fuse (multifuse) to
protect the supply voltage connections against overload
by the stator.