User's Manual
Table Of Contents
- T40FM
- T40FM
- English
- 1 Safety information
- 2 Markings used
- 3 Applications
- 4 Structure and Mode of Operation
- 5 Mechanical installation
- 6 Electrical Connection
- 7 Shunt signal
- 8 Functionality testing
- 9 Loading capacity
- 10 Maintenance
- 11 Waste disposal and environmental protection
- 12 Dimensions
- 13 Order numbers, Accessories
- 14 Specifications
- 15 Supplementary Technical Information
- English
- T40FM
- Deutsch
- 1 Sicherheitshinweise
- 2 Verwendete Kennzeichnungen
- 3 Anwendung
- 4 Aufbau und Wirkungsweise
- 5 Mechanischer Einbau
- 6 Elektrischer Anschluss
- 7 Shuntsignal
- 8 Funktionsprüfung
- 9 Belastbarkeit
- 10 Wartung
- 11 Entsorgung und Umweltschutz
- 12 Abmessungen
- 13 Bestellnummern, Zubehör
- 14 Technische Daten
- 15 Ergänzende technische Informationen
- Deutsch
Electrical Connection
T40FM A3276-8.0 HBM: public 51
The information in this Chapter relates to the self-con
tained operation of the T40FM without HBM system solu
tions.
The supply voltage is electrically isolated from signal out
puts and shunt signal inputs. Connect a separated extra-
low voltage of 18 V … 30 V to pin 3 (+) and pin 2 (
) of
plugs 1 or 3. We recommend that you use HBM cable
KAB 8/00-2/2/2 and the appropriate sockets (see Ac
cessories). The cable can be up to 50m long for voltages
≥24V, otherwise it can be up to 20m long.
If the permissible cable length is exceeded, you can feed
the supply voltage in parallel over two connection cables
(plugs 1 and 3). This enables you to double the permiss
ible length. Alternatively, install an on-site power supply.
Important
The instant you switch on, a current of up to 4 A may flow
and this may switch off power packs with electronic cur
rent limiters.