User's Manual

16
HBM: Business Document
Prevention of stator axial oscillation
Depending on the operating conditions,
the stator may be excited to vibrate.
This effect is dependent on:

The rotational speed,

The antenna diameter,

The design of the machine base.
To prevent this axial oscillation, the antenna ring requires additional support
by the customer. There are two mounting slots on the upper antenna
segment clamp (with an inner diameter of 5.5mm), which can be used to
incorporate a clamping device .The cable plug also requires support in this
case, a construction example is shown in Fig. 5.7
Fig. 5.7: Construction example for connector cables (here for two plugs,
needs adjustment to MPZ1604008 to only one plug)
Important