Owner's manual

C – Ver. 9.02 – June 2011
12
To enter the user menu, press ALARM for 5 seconds while you are in the manual mode.
The display briefly shows ”USER MENU”. The core temperature display shows ”b” and the
number of the value to be set (see below).
You leave the user menu by turning the turn switch beyond ”0”.
1 Store pre-
setting
Time and temperature can be changed in HOT AIR, COMBI STEAMING
and STEAMING and saved by pressing ALARM. The alarm control lamp
flashes when data are ready to be saved.
The desired changes should be made before entering the USER MENU.
2 Timer Press STEP to change the various settings of the timer.
1) DATE. The date flashes in the temperature display. To set the date,
turn switch. 0 means daily start.
2) HOUR. Set the hour.
3) MINUTE. Set the minute.
4) MODE. Choose a mode by pressing one of the four mode keys.
5) TEMPERATURE. Set the oven temperature.
6) TIME (duration of program) 0:00 - 4:00.
Press ALARM to activate timer (ON appears in the temperature display
and control lamp is on). Deactivate by pressing ALARM. The oven can
now be turned off with the main switch or it can be left on standby. The
oven starts automatically but only in the manual mode.
3 Volume low Press STEP and adjust the volume of the alarm during operation from 0
to 9.
4 Volume high Press STEP and adjust the volume of the alarm at the end of a
program/mode from 1 to 9.
5 Sound
frequency
Press STEP and adjust from 1 to 9.
6 Interior light Press STEP: 0 = continuously on / 5 = off after 5 min.
7 Current
temperature
0 = desired temperature / 1 = current temperature. Adjust by pressing
STEP.
8 Extraction Applicable only if oven has condensing extraction hood. 0 = extraction
hood running independently of oven / 1 = extraction hood stops 10
minutes after oven has stopped.
9 Time graphics Shown in text display during operation. Change by pressing STEP.
0 = Display shows mode chosen
1 = Display alternately shows mode chosen and time remaining.
10 Minutes Minutes are shown in temperature display. Change by pressing
temperature key and turning switch. Store by pressing temperature key
again.
11 Hour Hour is shown in temperature display. See 10. Press PROGRAMS to
change between 12-hour or 24-hour clock.
12 Day Day of the month, 1-31. Day of the week, 1 – 7, in time display. See 10.
In Europe, you can choose to have the computer switch to summer time
automatically. 0 = No change, 1 = Change from/to summer time.
13 Month Month. See 10.
14 Year The year 2007 is indicated by ”7”. See 10.
15 CombiWash Not in use
16 Injection
interval 1
Combi steaming 1: See 18 (factory setting is every 12 seconds)
User menu