Owner's manual

C – Ver. 9.02 – June 2011
5
The manually operated cleaning system can be activated by pressing the PRG key and turning
the turn switch until CLEANING appears in the display.
HOT AIR 30-250°C. All modes
and all optional extras are
described on following pages.
Preheating up to 300°C is a
standard feature on models C
and K.
REGENERATING / COMBI
STEAMING
Change between the modes
by pressing
REGENERATING
COMBI STEAMING 1
COMBI STEAMING 2
STEAMING 30-120°C. Used
for manual humidity pulsing
in HOT AIR during
preparation.
EXHAUST is open when
control lamp is on.
Low FAN SPEED is active
when control lamp is on.
SETTING CORE TEMPERATURE
PROBE. Press once and set
with TURN SWITCH. Deactivate
by turning switch past the
permitted temp. range of 30-
99°C.
TEMPERATURE SETTING. Press
once and set temperature with
TURN SWITCH. Enter by
pressing symbol again.
PROGRAMMES. Press once and
choose program with TURN
SWITCH. Editing and deleting
are described on following
pages.
ON/OF
F
STEP shows current step when
PROGRAMME mode is active.
Control lamp next to ALARM
lights up when alarm after a
step has been chosen (when
PRG is active).
Main switch
TIME SETTING. Press once and
set time with TURN SWITCH. 4
hours is maximum. Confirm by
pressing TIME.
Operation panel
Turn switch