Owner's manual

C – Ver. 9.02 – June 2011
6
Setting of temperature
Press TEMPERATURE key once and set temperature with turn switch.
Confirm by pressing TEMPERATURE key again.
Setting of time
Press TIME key.
Time flashes.
Choose desired time (hours and minutes) with turn switch.
If switch is turned all the way down to 0,”-:--” (continuous operation) appears in the display.
Max. time setting is 4 hours.
Confirm by pressing TIME key again.
Setting of core temperature (optional extra)
Press CORE TEMPERATURE key.
If the display is off, the core temperature appears as 75°C.
Set core temperature between 30 and 99°C with turn switch.
Core temperature is deactivated by turning switch past 30.
When core temperature is chosen, time changes to ”-:--” .
Confirm by pressing CORE TEMPERATURE key again.
The core temperature probe has several measuring points on its tip.
The computer calculates an average temperature thus ensuring that the core temperature is
100% correct.
If the probe is inserted incorrectly, the advanced technology notifies you at once.
The probe is inserted vertically in the thickest part of the product.
When preparing products of very different sizes, you get a uniform quality by inserting the
sensor in the smallest product and then moving it to a larger product when the core
temperature alarm sounds.
Programmes
10 programmes that can hold 3 process steps each. It is possible to write 10 characters and
entering alarm after steps 1 and 2.
Press PRG and turn the switch. The first five programmes are preset at the factory (P0 – P4).
Start the programme by pressing the ON/OFF key.
To leave PROGRAMME, turn the switch beyond ”P O”.
To delete an entire programme, press core temperature key and alarm key simultaneously for
2 seconds.
When the keys or the turn switch is idle for 20 seconds, the oven returns to manual operation.
Entering and changing text
To enter or change text, press PRG for 3 seconds.
The first digit or the relevant letter/”_” flashes alternately. Change the flashing character with
the turn switch. You can choose between all the letters of the alphabet and the digits 0 – 9.
The space sign is next to the letter A.
Move on to the next digit by pressing PRG briefly.
Store text by pressing PRG until “SAVED” appears in the display.
To leave text editing without storing, press ALARM. The original text reappears.
To delete the entire text, press PRG and ALARM simultaneously for 2 seconds.
When a key or the turn switch is idle for 20 seconds, the oven returns to select programme.
Settings