Installation Guide

How to Cut Piece # 1:
(C) Place crown moulding (#1) upside down (ceiling side down) in mitre box; push crown moulding tight against the
mitre box. Set mitre box at 45° to the right and make cut.
How to Cut Piece # 2:
(D) Place crown moulding (#2) in mitre box, ceiling side down. Set mitre box at 45° to the left and make cut. Repeat
this process for all inside corners of the room.
(E) Measure the distance between the two crown blocks (#1 and #2).
How to Cut a Compound Outside Mitre Cut
To cut a compound outside mitre cut you will need a mitre saw or mitre box, a power or hand saw, a measuring tape,
a pencil and safety goggles.