Assembly Instructions

We have designed our furniture with you , the customer in mind . Our clear , easy to follow ,

step by step instructions will guide you through the project from start to finish .

Feel confident that this will be a fun and rewarding project . The final product will be a quality

piece of furniture that will go together smoothly and give years of enjoyment .

Please do not return to the store

Broken or missing parts?

Need help with assembly?

STOP

ASSEMBLY INSTRUCTIONS

Square Console Table

If you have any questions just call or email us.

PAGE 1
Square Console Table ASSEMBLY INSTRUCTIONS We have designed our furniture with you , the customer in mind . Our clear , easy to follow , step by step instructions will guide you through the project from start to finish . Feel confident that this will be a fun and rewarding project . The final product will be a quality piece of furniture that will go together smoothly and give years of enjoyment .
PAGE 2
Hardware List A B Screw (20pcs) C D Allen Wrench (1pc) Non-slip disk (12pcs) E F Cable tie (2pcs) Polishing cloth (1pc) G Eyelet screw (2pcs) Anchor (2pcs) Panel List 1 2 Glass (2pcs) Frame 3 Front Rail (1pc ) (2pcs) 4 Rail (3pcs) *Please count and verify all parts before assembly .
PAGE 3
Exploded View 1 1 3 4 2 4 2 4 Page 3 of 6
PAGE 4
Step 1 *Assemble unit on carpet or another soft surface. A 1.Connect frames (2) together by sliding them into rails (4) and front rail (3) as shown. 2.Secure front rail ( 3 ) and rails ( 4) to frames ( 2 ) as shown using screws (A) and allen wrench (B) . X16 *Do not fully tighten Screws (A) until all have been started.
PAGE 5
Step 2 1.Place non-slip disks (C) into assembly as shown to support glass shelf. C C C C C C C C C C C C Step 3 1. Retighten all screws. 2. Using a slight angle, carefully insert glass ( 1 ) into unit.
PAGE 6
Step 4 1.Drill holes slightly smaller than anchors (E)into drywall and gently tap anchors into holes. 2.Insert eyelet screws (G) into anchors and fasten unit to wall using cable ties (F).