Installation Instructions

Table Of Contents

Mounting Strap

Junction Box

Screw

Mounting Screw

1ea 4" 2ea 8/32"X1" 2ea 8/32"X28mm

Wire Connector Hex Nut

Deco Nut (round

nut)

3ea P4 Orange 2ea 8/32"X3.5mm 2ea 12mm

Green Ground

Screw

1ea 8/32"X10mm

Part Needed Quantity

Reason why ( missing, scratched, broken glass, bent, bad finish)

Comments

1. Install the light bulb in accordance with the

fixture's specifications.

2. Carefully clip the Fabric Shade ( K ) onto the

bulb.

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)

Fig. 4

For Customer Service, contact the place of purchase to arrange for replacement parts.

FIXTURE ASSEMBLY INSTRUCTIONS

Read and review installation instruction sheet before

assembling the fixture.

This fixture assembled PO:__________ Date: ________

PARTS & ASSEMBLY SHEET

Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or

damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.

PARTS LIST

Company Name:_______________________ Co. Account #:_____________

below to be filled out by retailer

PAGE 1
PARTS & ASSEMBLY SHEET This fixture assembled PO:__________ Date: ________ Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts. PARTS LIST Company Name:_______________________ Co.
PAGE 2
INSTALLATION INSTRUCTIONS For Wall Mount Light Fixture WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER. HANGING THE FIXTURE (Fig. 1) 1. Carefully remove the new fixture from the carton and the yellow bag that holes all your parts. Check that all parts are included as shown in the illustrations and the Parts List. 2. Shut off power at the circuit breaker and completely remove the old fixture from wall, including the old mounting strap. 3. Mounting Strap(A) contains several pairs of threaded holes.