“Diacom Technology” INFORMATION-MEASURING DEVICES OF THE «DIACOM» TYPE WITH A LOW FREQUENCY GENERATOR MODULE UP TO 1 MHZ AND FREQUENCY GENERATORS UP TO 1 MHZ «Diacom-Lite-FREQ», «Diacom-Lite-FREQ-Euro» «Diacom-Lite-FREQ-Utium», «Diacom-SOLO-NLS», «Diacom-NLS-minica», «Diacom-SOLO-FREQ-Personal-Medio», «Diacom-SOLO-FREQ-Home», «Diacom-SOLO-FREQ-PC» User manual Guarantee manual Warranty certificates Czech Republic Prague 2020
TABLE OF CONTENTS Introduction. 3 About devices. 5 Minimum system requirements to can operate the «Diacom» devices. 5 How to connect the "Diacom" device to the computer. 5 How to operate the devices «Diacom-Lite-FREQ», «Diacom-LiteFREQ-Euro», «Diacom-Lite-FREQ-Utium», «Diacom-SOLONLS», «Diacom-NLS-minica», «Diacom-SOLO-FREQ-PersonalMedio», «Diacom-SOLO-FREQ-Home», «Diacom-SOLO-FREQPC». 6 Design and technical features and differences of devices, a brief description.
Introduction. The present devices have been developed on the basis of own researches as a result of which the invention which has become a basis of manufacture of the above-stated devices has been carried out. Subsequently, a patent for the invention was obtained, confirming the originality of the technology used in the devices, under the number - RU0002721874. https://patentscope.wipo.int/search/en/detail.
All products have passed the necessary certification in the Czech Republic and in several other countries. Can be marked with a sign . INSTRUCTION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 18 of the FCC Rules. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
About the devices. Devices are designed for generation and measurement of electromagnetic oscillations by method of comparison of natural frequency of internal generator and frequency of measured object. Data can be displayed on a computer monitor and presented in graphic form and in the form of digital arrays, for subsequent analysis. To operate devices, Diacom Technology has developed a number of programs that can be downloaded on the company's website at www.diacom.technology in the "Programs" section.
How to operate the devices «Diacom-Lite-FREQ», «Diacom-Lite-FREQ-Euro», «DiacomLite-FREQ-Utium», «Diacom-SOLO-NLS», «Diacom-NLS-minica», «Diacom-SOLOFREQ-Personal-Medio», «Diacom-SOLO-FREQ-Home», «Diacom-SOLO-FREQ-PC». 1. Connect the "Diacom" device to a computer with software and drivers installed. 2. Turn on the device with the toggle switch located at the back panel. ("Diacom-SOLOFREQ-PC" turns on immediately when connected to a computer and is not equipped with a toggle switch). 3.
«Diacom-SOLO-FREQ-Home» - the device is equipped with an internal circuit module of a low-power digital generator of low frequency. It is designed to work independently with its own low frequency modulation program using a digital low power generator. Equipped with LED indication. It differs from "Diacom-SOLO-FREQ-Personal-Medio" by a simplified proprietary program with predefined lists of specialized frequencies for the destruction of pathogenic microflora.
Block diagram of the "Diacom" device.
Limited warranty conditions. The devices are manufactured in the Czech Republic. This warranty applies to all Diacom information and measurement devices, except for components and accessories that are not part of the main unit and are subject to mechanical impact during operation. These components and accessories, as defined by the manufacturer, are consumables. Such components are - cables, wires and accessories that do not contain active radio components (bio-inductors).
Release data. Type (marking) of the device: *Diacom- _____________________________________________________________ * Serial number of the device: __________________________________ From vendor ________________________ Official seal affixed by vendor Dealer (vendor): ______________________________________________________ *Device sale date: ___________________________20____г.
Device acceptance and sourcing information. Date of issue ______________________________ 20_____. Complete set: Main device Bio-inductors Reprinter FREQ cables USB cable Manual Cardboard packaging Case The device is packed __________________________________________ Date ______ ____________ 20_____. * I have read the terms of sale and warranty obligations (see above) : __________________________ ( _____________________________________ ) «____» __________20____ .
Information on repair works performed. 1. Date of acceptance for repair _________________________ 2. Comissioning date _________________________ 3. Cause of malfunction _________________________ 4.
Diacom Technology Mkrtchyan Khachatur Jedova 189, Neratovice 277 11 Czech Republic.