User's Manual

5
Czech Republic
Prague 2020
About the devices.
Devices are designed for generation and measurement of electromagnetic oscillations by
method of comparison of natural frequency of internal generator and frequency of measured
object. Data can be displayed on a computer monitor and presented in graphic form and in the
form of digital arrays, for subsequent analysis. To operate devices, Diacom Technology has
developed a number of programs that can be downloaded on the company's website at
www.diacom.technology in the "Programs" section.
A conventional unit is used to measure data. A signal span ranges from 0 to 100
conventional units. The device can also generate frequencies up to 1 MHz. The software also
uses various graphical indicators when working. The software is designed for detection of
biologically active zones, analysis of their changes, as well as for detection of pathogenic
microflora, which can affect the normal vital activity of humans and animals. Studying and
analyzing the general mutual influence of pathogenic microflora and changes in electromagnetic
fluctuation in these processes.
In order to obtain the skills of correct work with the software developed by Diacom, it is
necessary to undergo training.
Minimum system requirements for "Diacom" devices.
Intel-Core i5 or higher processor at least 2.0 GHz,
RAM is not less than RAM OF 6 GB,
SSD Disk Space 10 GB
Screen permission is minimum: 1360х768 High Color 16 bit
Monitor 17´ and more
OS isn't lower Windows 10 and above
One free USB port.
How to connect the "Diacom" device to the computer.
Before connecting the device to your computer, you should download the necessary
software from the company's website, to the web addresses indicated on the packing list or from
the web address: www.diacom.technology. Install the driver of your device, according to its
name, the standard method for installing drivers for Windows OS, "Warning" when connecting
the device to your computer, you may need to confirm that the device driver is up-to-date, which
is not its reinstallation. Next, we install software to operate the device. Run the Software
Installation Wizard and, by clicking the active buttons of the Installation Wizard sequentially,
carefully reading its messages until a button appears indicating that the installation has finished,
install the device software on your computer. Each device type has its own software package.