User's Manual

6
Czech Republic
Prague 2020
How to operate the devices «Diacom-Lite-FREQ», «Diacom-Lite-FREQ-Euro», «Diacom-
Lite-FREQ-Utium», «Diacom-SOLO-NLS», «Diacom-NLS-minica», «Diacom-SOLO-
FREQ-Personal-Medio», «Diacom-SOLO-FREQ-Home», «Diacom-SOLO-FREQ-PC».
1. Connect the "Diacom" device to a computer with software and drivers installed.
2. Turn on the device with the toggle switch located at the back panel. ("Diacom-SOLO-
FREQ-PC" turns on immediately when connected to a computer and is not equipped with a
toggle switch).
3. Run the required program.
Disconnect in reverse order!
Attention!
Supplying more than 3 V. electrical voltage to the inputs of the "Diacom" device can lead
to a failure of the input and output circuits of the device and make it unsuitable for further
operation, while the warranty obligations will lose force.
Any attempt to open the device or remove the protective sticker deprives the owner of the
device of the warranty, and the manufacturer is not responsible for the consequences of these
actions!
Design and technical features and differences of devices, a brief description.
«Diacom-Lite-FREQ» - the device is equipped with a measuring module, intra-circuit
heterodyne and a module for additional generation of low frequency. Designed to work with
programs measuring the frequency of low-precision oscillations and low frequency modulation
programs.
«Diacom-Lite-FREQ-EURO» - the device is equipped with a measuring module, intra-
circuit heterodyne and a module for additional generation of low frequency. It is designed to
work with programs for measuring the frequency of low-current oscillations and programs for
modulation of low frequency.
«Diacom-Lite-FREQ-Utium» - the device is equipped with a measuring module, an in-
circuit heterodyne and a module for additional low-frequency generation. It is designed to work
with programs for measuring the frequency of low-current oscillations and programs for
modulation of low frequency.
«Diacom-SOLO-NLS» - device is equipped with measuring module, internal circuit local
oscillator. Designed to work with programs for measuring the frequency of low-current
oscillations.
«Diacom-NLS-minica» - The device is equipped with a measuring module, internal circuit
heterodyne. Designed to work with programs for measuring the frequency of low-current
oscillations.
«Diacom-SOLO-FREQ-PC» - the device is equipped with an internal circuit module of a
low-power digital generator of low frequency. Designed to work with low-frequency modulation
programs using a low-power digital generator.
«Diacom-SOLO-FREQ-Personal-Medio» - the device is equipped with an internal circuit
module of a low-power digital generator of low frequency. It is designed to work independently
with its own low frequency modulation program using a digital low power generator. Equipped
with a graphic display.