User's Manual

4 5
Connecting Your Music Device(s) via 3.5mm Auxiliary Input
(Solid Red LED)
Connecting Your Music Device(s) via Bluetooth
Pairing Mode (Blinking Blue LED)
Chant automatically goes into pairing mode for 5 minutes as soon as you turn it on.
You can also manually put Chant into pairing mode by holding the ON slider switch
in the left-most position for 3 seconds.
Connected Mode (Solid Blue LED)
Pair to Chant from your Bluetooth-enabled device. Chant does not require a pairing
password. Once paired, the LED will glow solid blue.
Note: Chant will automatically pair with the last device connected to it when turned
ON (when possible).
Easy To Use
Turn “ON” Turn “OFF”
Hanging Out
(Cable Not Included)
Note: Holding the ON slider for 3 seconds
will kick off the device currently connected
to Chant and go into Pairing Mode.
Note: If the 3.5mm Auxiliary
Input cable is connected to
Chant, it will automatically
be selected as the default
input, and Bluetooth devices
will not be able to play music
to Chant until the cable is
unplugged.
If there is a 3.5mm Auxiliary Input Cable connected, the LED on top of Chant will
glow RED.
Chant will automatically go to pairing mode for 5 minutes (blinking BLUE LED)
when turned ON. Once a device is paired, the BLUE LED will glow solid.
With Chant and the built-in microphone, you can answer phone calls and hang up
by sliding the slider switch to the left-most position and releasing.