Installation Guide

23800-5-0909 Page 17
PIEZO PILOT IGNITOR

Piezo is located adjacent to gas valve. Open casing door to access
piezo ignitor.
Depressing the piezo ignitor button completely causes a spark to

opening the pilot hole cover.

from the thermopile. The spark must occur at the point the burner

with the pilot on.
On a new installation with air in the gas line, it is suggested that a
match be used. The match will light the pilot faster than the piezo
under this condition.
PIEZO IGNITOR
OPTIONAL THERMOSTAT BRACKET INSTALLATION
 
8 x 3/8" Phillips screws.
Figure 34
5. Replace the outer casing.
6. Remove cover of thermostat from base.
Figure 35
7. Feed wires through rectangular slots.
Figure 36
 
screws.
Figure 37
9. Connect the thermostat wires to the terminal screws.
Figure 38
10. Replace thermostat cover.
Figure 39