Installation Guide

23800-5-0909 Page 9
1. In selecting a location for installation, it is necessary to provide
      
installation.
 

NOTE:          
maintained from top surface of carpeting, tile, etc.
CLEARANCES
S

the outer casing, or where circulation could be retarded by furniture or cabinets.
Do not install in a closet, alcove or small hallway where the furnace could be isolated by closing doors to the heated space.
When location is selected, check the walls, attic and roof to make sure there are no obstructions such as pipes, electric wiring, etc., which
would interfere with the installation of the furnace or vent pipe.
NOTE: 
in wall before furnace is installed.
NOTE: If Optional Blower is to be used, hard wiring must be completed for the optional blower prior to installation of header plate.
LOCATION - ALL MODELS
Figure 6
Figure 7 Figure 8 Figure 9