Product Manual

33444-0-0414 Page 19
INSTALLATION OVERVIEW
2
SILICON-BASED
SEALANT
MOUNTING
PLATE
CAP
FLUE OUTLET
TUBE
AIR INLET
TUBE
Failure to position these parts in accordance with dia-
gram or failure to use only parts specically approved
with these appliances may result in property damage
or personal injury.
INSTALLATION OF HOUSEWARMER PRODUCT
ATTENTION! INSTALLATION AND ANY REPAIRS TO THIS APPLIANCE MUST BE DONE BY A
QUALIFIED SERVICE PERSON.
WARNING: Read the installation instructions thoroughly before cutting or drilling any holes
for installation.
WARNING: Do not remove any rating plates attached to the appliance.
A qualied service person should be called to inspect this appliance annually.
Have all of your appliances checked annually.
3
MINIMUM CLEARANCES TO COMBUSTIBLES
Allow clearances (for all models) to adjacent combustible
construction materials.
IMPORTANT: A qualied service person must install this
appliance. Installation must conform to local codes, or in
the absence of local codes, with the latest edition of the
National Fuel Gas Code, ANSI Z223.1.