Installation Guide

9. Attach outer casing to inner casing with (2) screws from
Step 4.
CASING BRACKET
SCREW HOLES
Figure 10
10. Positionblowerhousingushwithwallsurfaceandontop
of outer casing. Complete tightening blower housing screws
from Step 3 to wall.
Figure 11
11. Position blower front on top of outer casing and reconnect fan
control wire assembly to power cord and motor wire.
12. Attach blower front to blower housing with (4) 8 x 3/8" screws
from Step 6.
Caution: When installing blower housing onto wall be care-
ful motor coil is not damaged.
Figure 12
13. Installation of optional blower assembly is completed.
Figure 13
23820-3-0409Page 4