User's Manual

Houston Radar DC310 User Manual
Page 19 of 27
STEP 4: Set the radar cutoff speeds (low and high speed cutoff)
Cutoff speeds affect the measurement range for sending speed out over the serial port and
activation of the hardware trigger outputs.
Cutoff speeds will affect collection of traffic statistics for the DC310. Traffic statistics
will not collected outside of the detection limits.
Set the minimum speed you wish the
radar to pick up and display. This is
also the minimum speed that will
activate the trigger outputs.
You may enter a number, click the
up/dn arrows or move the slider.
Set the maximum speed you wish
the radar to pick up and display.
This is also the maximum speed
that will activate the trigger
outputs.