Topmount Sinks ar Mounting Clips (included)
. If you are replacing old sink, remove old one and verify existing countertop opening will fit your new sink by setting it temporarily. (For model 3120-8BS please see template that comes with the sink) jig 8. Attach faucet and strainers as necessary according to the manufacturer’s instructions. 9. Verify your sink installation channel and clips that came with the sink and follow proper instructions below. I-Channel System L-shaped single blade channel 10.Place the sink upside down.
U-channel System U-shaped double blade channel 10. Insert clip into the channel from the end, placing screw head inside the channel. Locate 3 clips in front and back. 2 clips to each side and arrange spacing evenly around the sink. Position the clip assembly pararrel to the channel. 11. Place the sink carefully into the cutout opening and be sure it is properly seated. Make sure sink rim covers caulking all around. Press down firmly around the perimeter of the sink rim. 12.
HOUZER Inc. 2605 Kuser Road, Hamilton, NJ 08691 Ph.1.800.880.3639 F. 1.609.584.1930 www.HouzerSink.
