Lavatory Sinks ar Mounting Clips (included) Screwdriver Electric Drill
Please carefully read complete instructions before begining installation. 1. Unpack the new sink and check the contents of the materials supplied: (1) sink, Mounting brackets, cutout template. 2. Supplied cutout template provides two installation options. Topmount (Drop-in) installation Undermount installation 3. Place the template in desired position on countertop, locating center of the bowl over cabinet and faucet holes. 4.
7. Countertop Installation (Vessel sink) (Figure 5) 7-1. Prepare countertop by drilling a 1-3/4” diameter drain hole at desired location. (Figure 6) 7-2. Position lavatory sink on countertop as shown Secure lavatory to the countertop by installing drain through drain hole. (Figure 7) 7 8. Install waste system according to the mfr’s instructions. Do not over tighten screw. Wipe off excess sealant.
HOUZER Inc. 2605 Kuser Road, Hamilton, NJ 08691 Ph.1.800.880.3639 F. 1.609.584.1930 www.HouzerSink.