Installation Guide

The manufacturer

Undermount Fireclay Sink

The manufacturer recommends that Fireclay sinks should be

installed by a profeessional experienced installer.

The manufacturer recommends that the sink

counertop cutout provide a 1/8” overhang

into the sink bowl opening. However it is strongly

recommended to understand and agree to the

consumer’s requirement and desired finished

appearance before you start the process.

PAGE 1
Undermount Fireclay Sink The manufacturer recommends that Fireclay sinks should be installed by a profeessional experienced installer. The manufacturer The manufacturer recommends that the sink counertop cutout provide a 1/8” overhang into the sink bowl opening. However it is strongly recommended to understand and agree to the consumer’s requirement and desired finished appearance before you start the process.
PAGE 2
Countertop Silicone Caulk (Not Furnished) Underlayment 1/8” Overhang Recommended Sink Set the sink into place and then level the sink with the top of the cabinet Apply sealant near the inside edge.