Installation Guide

Installation instructions for
Epicure series Farmhouse Sink
General Recommendations:
Please read installation and maintenance instructions thoroughly.
Inspect your sink for any noticeable damage before installation.
Check all local applicable plumbing and building codes.
These instructions are based on application to composite material or solid surface countertop installation only;
countertop application to stone, marble, granite or butcher-block should be referred to an experienced
countertop fabricator for custom installation.
Epicure series Farmhouse sinks are individually hand-crafted and HOUZER suggests using experienced and
professional installers only. For custom cutting of countertop and installation of the actual sink, on-site
installation is also recommended. Acceptable variances are approximately 1/8 of an inch. Alignment to
the cut-out and precise application and trimming of any adhesive sealant are critical to a superior fit and
finished look. Please take extra care in this regard.
Epicure series Farmhouse sinks require custom order cabinets. Consult your cabinet dealer.
HOUZER does not accept any liability for damage to countertop, sink fixture, faucets or personal injury
during installation. Warranty is void if installation instructions are not followed.
Tools and Materials needed:
Tape Measure
Framing Square
Eye Protection
Hacksaw/Jigsaw
Ear Protection
Silicone Adhesive Sealant
Rags
Shims
Wood Braces
Pencil (NOT ink)
Denatured Alcohol
Be sure to use proper tools and always wear personal safety devices for your protection.
1

Summary of content (4 pages)