MY FIRST E-BIKE O P E R AT I O N M A N U A L H 1 - M FEB
HELMETS SAVE LIVES! Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your E-Bike. Correct Fitting: Make sure your helmet covers your forehead. Incorrect Fitting: Forehead is exposed and vulnerable to serious injury.
WARNING! PLEASE READ THE USER MANUAL THOROUGHLY. Failure to follow the basic instructions and safety precautions listed in the user manual can lead to damage to your device, other property damage, serious bodily injury, and even death. Thank you for purchasing the My First E-Bike. Please read all instructions carefully before using and retain this manual for future use and reference. This manual applies to the My First E-Bike.
LOW TEMPERATURE WARNING Low temperature will affect the lubrication of moving parts inside the My First E-Bike, increasing internal resistance. At the same time, in low temperatures, the discharge capacity and the capacity itself of the battery will be significantly decreased. Use caution when riding the My First E-Bike in cold temperatures (below 40 degrees F).
• Each child's My First E-Bike is equipped with a dedicated lithium battery and a dedicated smart charger. Please do not use other chargers to charge our product, and other types of electric vehicles should not be charged with our charger. The user shall be responsible. NOTES: In this manual, the above symbol with the word “NOTES” indicates instructions or relevant facts the user should remember prior to using the device.
INTRODUCTION The My First E-Bike is a personal transporter. Our technology and production processes are developed with strict testing for each My First E-Bike. Operating the My First E-Bike without following the contents of this manual may lead to damage to your My First E-Bike, or bodily injury. This manual is designed to give you the information you need for the safe operation and maintenance of your My First E-Bike. Please read it thoroughly before riding your My First E-Bike.
HOVER-1 MY FIRST E-BIKE DIAGRAM 4 1 2 3 12 5 11 6 10 9 7 8 FEATURES/PARTS 1. Brake 2. Handle Bar 3. Steering Column 4. LED Display 5. Seat 6. Rear Wheel 7. Frame 8. Kickstand 9. Foot Pegs 10. Front Wheel 11. Front Fork 12.
PARTS LIST A A. My First E-Bike Frame B. Handlebar Assembly C. Seat D. Wrench + Allen Key/Screw Driver Tool E.
ASSEMBLY UNPACKING STEPS 1. Insert the front wheel into the fork in the direction indicated by the arrow in Figure (a). Make sure the front wheel hooks into the front fork positioning hole. Then use an open-end wrench to tighten the nut. A B C 2. Place the protective nut onto the outside of the lock nut as shown in Figure (b). 4. Insert the steering column into the front fork as shrown in figure (c) at a desired height. D E F 3. Peel back protective cover as shown by the arrow in Figure (d) 5.
BEFORE RIDING It is important that you fully understand all elements of your My First E-Bike. If these elements are not used correctly, you will not have full control of your My First E-Bike. Before you ride, learn the functions of the various mechanisms on your E-Bike. Practice using these elements of your My First E-Bike at slower speeds in a flat, open area before taking the device out in public areas.
SAFETY PRECAUTIONS Different localities and countries have different laws governing riding on public roads, and you should check with local officials to ensure you are complying with these laws. Hover-1 is not liable for tickets or violations given to riders who do not follow local laws and regulations. • For your safety, always wear a helmet that meets CPSC or CE safety standards. In the event of an accident, a helmet can protect you from serious injury and in some cases, even death.
SAFETY CHECKLIST • Do not ride above your skill level. Ensure you have had enough practice with all functions and features of your My First E-Bike. • Do not try to open or modify your My First E-Bike. Doing so, voids the manufacturer warranty and may cause your My First E-Bike to fail, resulting in injury or death. • Do not use the My First E-Bike in a manner that would put people or property in danger. • If riding near others, keep a safe distance to avoid collision.
• Operate your My First E-Bike with extreme caution when indoors, especially around people, property, and narrow spaces. • Do not operate the My First E-Bike while talking, texting, or looking at your phone. • Do not ride your My First E-Bike where it is not permitted. • Do not ride your My First E-Bike near motor vehicles or on public roads. • Do not travel up or down steep hills.
WARNING: To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one rider.
RIDING YOUR MY FIRST E-BIKE FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR MY FIRST E-BIKE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH. Before using your My First E-Bike, be sure to familiarize yourself with the operating procedures. OPERATING YOUR DEVICE Make sure the My First E-Bike is fully charged before your initial use.
WARNING Do not turn sharply or at high speeds to avoid danger. Do not turn or ride quickly along slopes, as it may cause injury. WEIGHT AND SPEED LIMITATIONS Speed and weight limits are set for your own safety. Please do not exceed the limits listed here in the manual. • Maximum Weight: 132 lbs • Minimum Weight: 44 lbs • Maximum Speed: Up to 8 mph OPERATING RANGE The My First E-Bike can travel a distance up to 7.5 miles on a fully charged battery in ideal conditions.
CHARGING YOUR MY FIRST E-BIKE CHARGING THE DEVICE • Ensure that the charging port is clean and dry. • Make sure that there is no dust, debris or dirt inside the port. • Plug the charger into a grounded wall outlet. The charging indicator light ON THE CHARGER indicates as a RED light if your My First E-Bike is not fully charged. • Connect the cable with the power supply (100-240V; 50/60 Hz).
BATTERY CARE / MAINTENANCE BATTERY SPECIFICATIONS Battery Type: Rechargeable lithium-ion battery Charge Time: Up to 3 hours Voltage: 25.9 V Initial Capacity: 4 Ah BATTERY MAINTENANCE The lithium-ion battery is built into the device. Do not disassemble the device to remove the battery or attempt to separate it from the device. • When charging the device, use the enclosed charging cable or otherwise ensure that the battery charging conditions are met.
• The battery contains dangerous substances, do not open the battery, or insert anything into the battery. • Only use the charger provided by Hover-1. • Do not attempt to charge the device if the battery has discharge or emits any substances. In that case, immediately distance yourself from the battery in case of fire or explosion. • Lithium-ion batteries are considered to be hazardous materials.
CARE & MAINTENANCE CHECK • Every three months, please check the bicycle to see if any screws are loose. If they are loose, please tighten them. BATTERY • After purchasing My first e-bike, fully charge the battery before use. • After a long period of riding, charge it soon. If the battery is exhausted and not charged in time, it will seriously shorten the battery life and even cause the battery to fail. • When the vehicle is not used for a long time, please charge it every 2 months.
WARRANTY For warranty information, Please visit us at: www.hover-1.
@RideHover1 @RideHover1 @RideHover1 www.Hover-1.
