Users Manual Part 1

Operating the Tablet

Powering-On

To power-on the Pilot X Tablet, press and hold the Sleep/Wake Button for approximately 3 seconds, and the

“HoverCam Pilot X” boot-up screen will appear. If the tablet does not power-on, ensure that the battery is

charged or receiving a charge.

Pilot X

Sleep/Wake

Button

Operating the Touchscreen

The Pilot X tablet is equipped with a 13.3 inch capacitive multitouch screen. The capacitive technology

responds to inputs from electrically charged objects, such as ﬁngertips and active styluses, and is not

pressure sensitive. Because of this, avoid pressing too ﬁrmly on the touchscreen, as this could cause

damage. 

The touchscreen is multitouch-enabled, allowing the user to scroll, zoom, swipe and more by using two or

more ﬁngers. For more information about touch gestures, visit the Windows

10 Support page at

www.support.microsoft.com/windows.

Pilot X also includes an active stylus. The active stylus must be charged through its rear charging port via the

included USB mini cable. Charging the stylus takes approximately 1 hour. The usage time is approximately

8-10 hours. The active technology can be switched on and oﬀ via the on/oﬀ button shown below:

Using the Active Stylus

Magnetic

End Ca

Mini USB

Charging Port

On/Oﬀ Button