Users Manual Part 1

Operating the Tablet

Imaging / Formatting

Windows® 10

Once powered-on, Pilot X will operate the latest non-licensed version

of Windows® 10. Essential functions, settings, operations and

commands are comparable to that of a new Windows®-operating

desktop including interface and system presets. A Windows® license

is not included, so a license key will be needed to unlock Windows®

10’s full capabilities. You do not have to activate Windows® 10 for

standard operations, but the system will be subject to the following

limitations:

•

An “Activate Windows®” watermark on the lower right-hand

corner of the display.

•

Personalization options will be inaccessible (wallpaper, accent

colors, lock screen, themes, etc).

For more information on how to use your Windows® 10 operating

system, see the full manual at www.support.microsoft.com/windows

Internal PC

Pilot X comes fully-integrated with an internal PC. No additional computing device is required to operate Pilot

X. See the below table for a list of key internal components and their speciﬁcations.

Operating System Microsoft

Windows

10 64-bit (license not included)

Processor Intel® Core™ M3-7Y30

Display Adapter Intel® HD Graphics 615

Storage 128GB SSD

Memory 8GB DDR RAM

Blueooth 4.0

WiFi Module Support 802.11B/G/N/AC

PC Speciﬁcations

An ethernet cable can be connected via a dongle (not included) to one of Pilot X’s USB ports (Type-A or

Type-C) to facilitate imaging and wired networking.

Note: When reformatting Pilot X, the reinstallation of speciﬁc drivers may be required. For detailed instructions

as well as the necessary drivers, please contact HoverCam Technical Support: support@thehovercam.com.

For convenience, the Pilot’s required drivers are also preloaded on the included USB Drive and can be

reinstalled after imaging.