Users Manual Part 1

8x 4mm

Bolts

4mm Hex

Driver

Optional

Thread-Locking

Compound

(Not Included)

Notice: Two people are required to safely assemble Pilot X

Assembling the Podium

Step 1

Step 2

Step 3

Carefully unpack the Pilot X Podium Surface, Podium Pedestal, Podium Wheel Base,

Hardware and Assembly Tools. Stage the components on the included foam packaging, or use

a padded surface.

Podium Surface Podium Pedestal

Podium Wheel

Base

Hardware and

Assembly Tools

Place the Podium Surface upside down on a padded surface, making sure the Tilt Adjustment

Dial is in the locked position by rotating it clockwise to the furthest position.

Carefully place the Podium Pedestal onto the Podium Surface, making sure the 8x 4mm bolt

holes line up properly. Next use the included hex driver to secure 8x 4mm Bolts as pictured

below, being careful not to strip the threads. 

Optionally, a thread-locking compound may be used to prevent loosening of the bolts over time

(not included). Loctite® Threadlocker Blue 242® is a recommended compound.

x12