Users Manual Part 2

13
HoverCast Positioning Guide
25
Standing in front of the Tablet’s HoverCast Wireless
Antenna can cause signal-drop. Do not stand between
antenna and receiver.
Mount the HoverCast Wireless Receiver as high as
possible to maximize line of sight and minimize chances
of signal interruption.
Do not mount the HoverCast Wireless Receiver on the
sides of a panel, as the low mount-height can lead to
signal interruptions.
Standing behind the Tablet’s HoverCast Wireless
Antenna will allow for maximum line of sight with the
HoverCast Wireless Receiver.
In some environments (like enclosed rooms with little
obstructions), the HoverCast signal can bounce off walls
and find its way back to the HoverCast receiver.
The HoverCast signal can pass through windows and
become lost. Avoid facing the HoverCast antenna
towards windows, and opt for line-of-sight positioning.
HoverCast Troubleshooting
If you are having issues connecting the HoverCast system, please contact HoverCam Technical
Support:
HoverCam Technical Support
[e-mail]
[phone]
© Copyright HoverCam® 2019