Users Manual Part 2

Document Camera

Deploying

The Pilot X tablet comes equipped with a Fold-Out Document Camera. The document camera can be used

as a lesson recorder, scanner, webcam, live annotation tool, microscope, show-and-tell device, audio

recorder, video logger, and much more. For optimal functionality, use the included Flex 11 or ClassFusion

softwares (page 18) to operate the document camera. Camera speciﬁcations are as follows:

Once deployed, the base can pivot outwards 180º, and can tilt up or down 180º. The post folds out of the

base, and adds an additional 180º range of upward/downward tilt. The head also tilts up or down 180º, and

can pivot 270º. When on a ﬂat surface, the camera’s viewable area can easily show full letter and legal sized

pages, and can even accommodate an A3 size when the camera arm is positioned properly.

Camera Sensor 13.0 MegaPixel BSI CMOS

Video Resolution 4K@30FPS, 1080p @60FPS, 720p @120FPS

Image Resolution 4224x3156 (13 MP)

Scan Size 128GB SSD

Zoom 480x (6x ASR, 8x Digital, 10x Mechanical)

Audio Built-in High-Fidelity Microphone

Focus AutoFocus, Selective Focus, Focus Lock

Lighting Integrated LED

Positioning

To deploy the document camera, push-down on the Document Camera Release Button (a silver circular

hinge found on top of the tablet), and the camera arm should release with a “click”. The camera arm can now

be rotated out of its recess. Once deployed, the system will detect that the camera is in use, and it will be

discoverable as a USB device. The camera arm has three moving sections: the Post, Head and Base.

Head

Post

Base

To close the document camera, simply fold the head and post back into the base, and rotate the base back

into the recess until it “clicks” into place. The system will know that the camera has been folded away, and

disconnect it to conserve battery.

180º

270º

180º