Users Manual Part 2

HoverCam may not offer the products, services, or features discussed in this document in all countries.

Consult your local HoverCam representative for information on the products and services currently

available in your area. Any reference to a HoverCam product, program, or service is not intended to

state or imply that only that HoverCam product, program, or service may be used. Any functionally

equivalent product, program, or service that does not infringe any HoverCam intellectual property right

may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any

other product, program, or service.

HoverCam may have patents or pending patent programs covering subject matter described in this

document. The furnishing of this document does not give you any license to these patents. You can

send license inquiries, in writing, to:

Pathway Innovations & Technologies, d.b.a. HoverCam

9985 Paciﬁc Heights Blvd

STE 100

San Diego, CA 92121

Attention: HoverCam Legal

HoverCam PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-

INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some

jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore,

this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically

made to the information herein; these changes will be incorporated in new editions of the publication.

HoverCam may make improvements and/or changes in the product(s) and/or the application(s)

described in this publication at any time without notice.

The products described in this document are not intended for use in implantation or other life support

applications where malfunction may result in injury or death to persons. The information contained in

this document does not affect or change HoverCam product speciﬁcations or warranties. Nothing in this

document shall operate as an express or implied license or indemnity under the intellectual property

rights of HoverCam or third parties. All information contained in this document was obtained in speciﬁc

environments and is presented as an illustration. The result obtained in other operating environments

may vary.

HoverCam may use or distribute any of the information you supply in any way it believes appropriate

without incurring any obligation to you.

Any references in this publication to non-HoverCam Web sites are provided for convenience only and

do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites

are not part of the materials for this HoverCam product, and use of those Web sites is at your own risk.

Any performance data contained herein was determined in a controlled environment. Therefore, the

result obtained in other operating environments may vary signiﬁcantly. Some measurements may have

been made on development-level systems and there is no guarantee that these measurements will be

the same on generally available systems. Furthermore, some measurements may have been estimated

through extrapolation. Actual results may vary. Users of this document should verify the applicable data

for their speciﬁc environment.

This document is copyrighted by HoverCam and HoverCam may update this document at any time

without notice. To obtain the most up-to-date documentation for your Podium, go to:

www.hovercam.com/support

Notices